Today, more than ever, you need reliable and easy to use products from a trusted partner who understands your sterilization needs. The Midmark M9 UltraClave Automatic Sterilizer was specifically designed and engineered to meet those needs. The intuitive display and simple prompts help you easily select the cycle you need... whether it is for unwrapped items, pouches, packs or handpieces. Once the sterilization process is complete, the door conveniently opens automatically and quietly to dissipate the steam and provide fast and efficient drying time of your instruments.
Create peace of mind by making the healthcare market's leading sterilizer... the Midmark M9 UltraClave... your preferred office choice.
1 pouch rack
Convenience at a glance.
The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode and dry mode, the remaining cycle time is displayed as well as temperature and pressure.
No more wet instruments.
Once the sterilization is complete, the door opens automatically and quietly to dissipate steam and dry your instruments. Youll have dry, sterile instruments every time.
If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization cant continue until you've attended to the unit.
Ease of draining & filling.
For ease of draining and filling, the Midmark M9's reservoir fill port and drain tube is in the front of the unit, not on top or in back.
Optional printer accessory.
The Midmark M9 printer accessory provides a permanent record of cycles, times, temperatures and pressures during a cycle.
Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275˚F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.
Four pre-programmed sterilization cycle controls: Unwrapped (132o C or 270o F for 3 minutes), Pouched (132o C or 270o F for 5 minutes), Packs (121o C or 250o F for 30 minutes), Handpiece (unwrapped and pouched) (132˚ C or 270˚ F for 6 minutes).
Midmark M9D AutoClave Automatic Sterilizer
The Midmark M9D AutoClave Automatic Sterilizer offers easy, effective sterilization but without the convenience of a door that opens automatically. One button starts the cycle... but at the end of the automatic sterilization process, you need to manually open the door within 30 minutes of completion to activate the dry cycle. This extra step is the only physical difference between the Midmark M9D and its automatic counterparts.
Manual or Automatic door (choose option below)
Chamber size: 9" x 15"
Overall length w/plug: 20.13" (51 cm)
Overall width: 15.3" (38.9 cm)
Overall height w/printer: 15.8" (40.1 cm)
Countertop area: 15.3" x 20.38" (38.9 cm x 51.8 cm)
Chamber: 9" diameter (22.9 cm) 15" depth (38.0 cm)
3.5 gal. usable volume (13.4 liters)
Trays: Two large 7 5/16" W x 12" L x 7/8" D (18.6 cm x 30.5 cm x 2.2 cm)
Two small 5 5/8" W x 12" L x 7/8" D (14.3 cm x 30.5 cm x 2.2 cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
115 VAC, 50/60 Hz, 15 AMPS Single Phase
115 VAC has 1425-watt tubular immersion heater
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041-96
A separate (dedicated) circuit is recommended for this sterilizer
Meets the requirements of ASME Boiler and Pressure Vessel Code